Tender For annual rate contract for construction work with materials and labour for mahudha nagarpalika area. - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead (a) for loose or soft soil, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying cement concrete 1:3:6 (1 cement : 3-coarse sand :6- hand broken stone aggregate 40 mm. nominal size) and curing complete excluding cost of form work in :(a) foundation and plinth, providing and laying compacted w.b.m. 100 mm. thick of grading-i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading-ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc slabs & landings, providing and casting in situ ordinary cement concrete m-200 forkerbs/kerb blocks including formwork, curing and finishing complete. (upto 10 ton), providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete (upto 10 ton), providing tmt bar fe 500/500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level (upto 10 ton), white stone bela masonry block in course in foundation, plinth & super structure with stone of approved quality in cement mortar 1:5 (1cement : 5 course sand) including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 : 4 course sand), providing 15 mm thick cement plaster in single coat on fair side brick/concrete walls for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry. (ii) cement mortar 1:4 ( 1 cement : 4 sand), providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. (ii) cement mortar 1:4 ( 1 cement : 4 sand), 20 mm thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1:cement - 3:sand) and 8 mm thick finishing coat of c.m. 1:1 (1:cement - 1:sand) etc. complete, providing and laying white glazed tiles of 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1:cement - 3-coarse sand) finished with flush pointing in white cement., providing and laying white glazed tiles of 6 mm thick in skirting of
Tender For general kyip dso 2026 27 jungle clearing debris removal and weathered rock cutting in the stilling basin portion for the geological mapping survey general civil work
Tender For supply of welding rod , welding helmet , cutting wheel 4 , hyd jack repair kit , wire stripper 160mm , stanley 9 in 1 screw driver set , rock force 100 pcs professional screw driver set , rectitude 5 in 1 multi function stripper steel cutting plier , iron cutter blade 14
Tender For supply of existing pipeline disconnectio , disman of pcc chiseling pneumatic hammer , disman of concretercc,cuttingof reinf , exca of earthsoft rock,cutting,clearing , removal of 200 kl tank , torsteel reinforcement , supply and fabofdishend shellplate , supplyofstructuralsteel and fabric , supply and installationofnozzles , supply and installation of sump , supply and ins. oftank manholes , sand blasting of tank , painting of tank internal , painting of tank external with piping , tank hydro testing after fabrication , instln of tank underground,180kl , tankcalibration and hydrotesting , pipinginchmeter laying ss304 , welding of pipeline , removal of sand murram soil , sand filling , sply and layg of concrete pcc,ratio , sup and lay of rccmixing test , sup and lay rr masonry,subandsuper str , construction of new earth pit
Tender For supply of jungle cutting dao akuwa dao , sickle , khurpi , sharpener rock , rake with handle , hammer with handle , saw , reti , shovel , watering pipe , secature , hedge cutting scissor , spade hoe with handle , rain coat whole body cover , belcha with handle , small dao , folding aluminum ladder , aluminum gamla, large size for mixing of manure , petrol storage drum , farming bamboo hat , dao for general use , black wire , plastic sutli , iron nail , mulch film , hacksaw frame , hacksaw blade , wire cutting plyer , jute gunny bags , jute stuli , bamboo , measuring tape , aluminum bucket , carry bag
Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma